Fairchild FSAM50SM60A, Manual

Page: 5 / 15

©2006 Fairchild Semiconductor Corporation
5
www.fairchildsemi.com
FSAM50SM60A Rev. C4
FSAM50SM60A Moti
on
SPM®
2 Series
Absolute Maximum Ratings
(T
J
= 25°C, unless otherwise specified.)
Inverter Part
2nd Notes:
1. It would be recommended that the average junction temperature should be limited to T
J

125

C (at T
C

100

C) in order to guarantee safe operation.
Control Part
Total System
Thermal Resistance
2nd Notes:
2. For the measurement point of case temperature(T
C
), please refer to Figure 2.
3. The thickness of thermal grease should not be more than 100

m.
Item Symbol Condition Rating Unit
Supply Voltage V
DC
Applied to DC-Link 450 V
Supply Voltage (Surge) V
PN(Surge)
Applied between P and N 500 V
Collector - Emitter Voltage V
CES
600 V
Each IGBT Collector Current ± I
C
T
C
= 25°C 50 A
Each IGBT Collector Current ± I
C
T
C
= 100°C 25 A
Each IGBT Collector Current (Peak) ± I
CP
T
C
= 25°C , Under 1ms Pulse Width 100 A
Collector Dissipation P
C
T
C
= 25°C per Chip 100 W
Operating Junction Temperature T
J
(2nd Note 1) -20 ~ 125 °C
Item Symbol Condition Rating Unit
Control Supply Voltage V
CC
Applied between V
CC(UH)
, V
CC(VH)
, V
CC(WH)
-
COM
(H)
, V
CC(L)
- COM
(L)
20 V
High-Side Control Bias Voltage V
BS
Applied between V
B(U)
- V
S(U)
, V
B(V)
- V
S(V)
, V
B(W)
-
V
S(W)
20 V
Input Signal Voltage V
IN
Applied between IN
(UH)
, IN
(VH)
, IN
(WH)
- COM
(H)
IN
(UL)
, IN
(VL)
, IN
(WL)
- COM
(L)
-0.3 ~ V
CC
+0.3 V
Fault Output Supply Voltage V
FO
Applied between V
FO
- COM
(L)
-0.3 ~ V
CC
+0.3 V
Fault Output Current I
FO
Sink Current at V
FO
Pin 5 mA
Current-Sensing Input Voltage V
SC
Applied between C
SC
- COM
(L)
-0.3 ~ V
CC
+0.3 V
Item Symbol Condition Rating Unit
Self-Protection Supply Voltage Limit
(Short-Circuit Protection Capability) V
PN(PROT)
Applied to DC-Link,
V
CC
= V
BS
= 13.5 ~ 16.5 V
T
J
= 125°C, Non-Repetitive, < 5

s
400 V
Module Case Operation Temperature T
C
See Figure 2 -20 ~ 100 °C
Storage Temperature T
STG
-20 ~ 125 °C
Isolation Voltage V
ISO
60Hz, Sinusoidal, AC 1 Minute, Connect
Pins to Heat Sink Plate 2500 V
rms
Item Symbol Condition Min. Typ. Max. Unit
Junction to Case Thermal
Resistance R
th(j-c)Q
Inverter IGBT Part (per 1/6 module) - - 1.00 °C/W
R
th(j-c)F
Inverter FWDi Part (per 1/6 module) - - 1.50 °C/W
Contact Thermal
Resistance R
th(c-f)
DBC Substrate (per 1 Module)
Thermal Grease Applied (2nd Note 3) - - 0.06 °C/W