Fair-Play SP-70, User Manual

Page: 39 / 71

Chapter 7: Wireless
33
Changing your settings
High power transmit
To change any or all of these three settings, hold down the
SHIFT
key and
press the number
9
key. The top line of the LCD will display HIPOWER
XMIT? Y/N.
•
If you respond
YES
, the radio transmitter will send the radio signal at
full power.
• If you respond
NO
, then the control transmit range will decrease (this
is typically used for testing).
All scoreboards
The prompt ALL SCBDS? Y/N will appear next. If you respond
YES
, the
radio transmitter will switch to ALL SCOREBOARDS mode. If your response
is
NO
, the transmitter will switch to SEL mode.
Select channel
The final prompt in this series will be SEL.CHANNEL_0. At this prompt,
you need to select your channel. Enter a one or two-digit number for the
desired channel. Press
ENTER
.
More information on selecting channels is included in the following sec-
tion.
Note: If you want the ALL SCBDS feature to be dis-
abled, a lockout jumper (Fair-Play part number C1452)
is available for purchase and installation in indoor
scoreboards. All indoor scoreboards are shipped with-
out this jumper installed.