Fair-Play SP-70, User Manual

Page: 42 / 71

SP-70 Statistics Controller User’s Guide
36
Verifying scoreboard signal lock
If you cannot tell what channel your scoreboard is set up to receive, you
will need to find its signal lock. A signal lock takes place when the receiver
card in your display has located the transmission signal from your wireless
control.
To locate the operating channel, hold the
SHIFT
key, then press the
9
key.
Skip the first two prompts, until you get to the SEL CHANNEL? prompt.
Then, enter all of the possible channel numbers, starting with channel 1,
and working up to channel 13. If the transmitter and receiver cards are
both functioning properly, then the scoreboard should work on one of
these 13 channels.