
39
5.1.3 M
IXING
W
IDE
A
ND
N
ARROW
D
ISK
D
RIVES
Wide and Narrow based disk drives can be mixed on the same SCSI buss at the same
time -
Narrow Based SCSI Disk Drives must always be the last in the chain after any Wide disks
are connected.
If the Engine is configured to run in Wide Mode, a quality 68 pin to 50 pin Adaptor must be
used when connecting from the SCSI buss to a narrow disk drive.
Please note the High Data Byte must be terminated when using an Adaptor, to allow for
correct termination wide converting to a Narrow disk drive.
Remember to always terminate the last drive in the chain.
If the Engine is configured to run in Narrow mode, an Adaptor without High Byte
termination may be used.
Remember to always terminate the last drive in the chain.
Summary of Contents for Fame 2
