FAHRBIKE CRUZ, Owner'S Manual

Page: 13 / 30

(G)Seat
Open the seat tube lever, insert the seat post, and close the lever to lock.
Rotate the lever to adjust the lock tightness.
Adjust the seat angle by loosening the bolt underneath the seat. You can tilt
the seat up or down and move it forward or backward to fit your comfort
(required tools: 5mm hex key, recommended torque 25 Nm).
11
!
!
WARNING
(I)Hydraulic Brake Lever Adjustment (required tools: 2mm hex key)
(H)Bottle Holder (optional)
Use the screws mounted on the frame tube seat to install the bottle holder.
Tighten the indicated bolt to extend the brake lever reach.
Loosen the indicated bolt to shorten the brake lever reach.
FAHRBIKE-CRUZ
Do not raise the seat post beyond the minimum insertion point line. Doing so
may cause the seat post or frame to break and can result in serious injury or death.