FAHRBIKE CRUZ, Owner'S Manual

Page: 12 / 30

10
(F)Pedals
(required tools: 15mm wrench, recommended torque 35-40 Nm)
The right and left pedals are marked with an "R" or "L" at the end of the thread. The right pedal axle has a
smooth surface, while the left pedal axle has grooves.
The pedal and crank threads are designed to engage easily. Tighten the pedals by hand first. It should be easy
for the first few turns. Do not force the pedals if tightening is difficult. If tightening is difficult, stop immedi-
ately as the pedal thread is not aligned, and continuing to tighten will damage the crank arm thread.
Apply a small amount of grease to the pedal axle.
Insert the right pedal into the right crank arm. Carefully and slowly turn the pedal clockwise by hand onto
the crank and then tighten it completely.
Insert the left pedal into the left crank arm. Carefully and slowly turn the pedal counterclockwise by hand
onto the crank and then pull it completely tight.
!
Inserting the pedal in the wrong way, installing it at the wrong angle, or improper
tightening will strip the crank arm threads and cause the pedal to come off.
!
WARNING
FAHRBIKE-C RUZ