Fagron FagronLab RVC1, User Manual

Page: 20 / 24

FagronLab™ RVC1
FagronLab™ RVC1 – User Manual | 20
10. Battery removal
Note:
• Only use the original battery of the product, otherwise it may cause product damage.
Warning:
• You must remove (or attempt to remove) the battery incorporated in this product on your own. To
replace the battery, you must contact your service provider or an independent qualified professional.
These instructions have been prepared for the exclusive use of your service provider or independent
qualified professional.
FOR YOUR OWN SAFETY, DO NOT ATTEMP TO REMOVE THE BATTERY ON YOUR OWN OR
DISPOSE OF IT IN FIRE. DO NOT DISASSEMBLE, CRUSH OR PUNCTURE THE BATTERY.
• Remove the screws on battery cover with a screw driver.
• Remove the battery cover.
• Grasp the insulating tape at two sides of the battery and lift the battery.
• Unplug the wire connector that links the battery and robot.
Applicable in countries with battery return systems
The marking on the battery, manual or packaging indicates that the battery in this
product should not be disposed of with other household waste. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or
lead above the reference levels in EC Directive 2006/66.
The battery incorporated in this product is not user replaceable. For information on its
replacement, please contact your service provider. Do not attempt to remove the battery
or dispose it in a fire. Do not disassemble, crush, or puncture the battery. If you intend to
discard the product, the waste collection site will take the appropriate measures for the
recycling and treatment of the product, including the battery.