FagronLab™ RVC1
FagronLab™ RVC1 – User Manual | 13
Cleaning modes
Auto cleaning mode
Spot cleaning mode
Edge cleaning mode
Zig-Zag cleaning mode
Please touch the "CLEAN" button to start cleaning. You can only select the cleaning mode when the robot is cleaning, press
the MODE button on remote control to select the cleaning mode, the mode type will appear on the robot’s 4 Digits LED
Display as follow:
•
1111:
Spot Cleaning Mode
•
2222:
Auto Cleaning Mode
•
3333:
Edge Cleaning Mode
•
4444:
Zig-Zag Cleaning Mode
•
The robot will activate spot cleaning mode under the following condition:
1.
When it detects a dirty area in the lab.
2.
Press SPOT on remote control or "SPOT" on robot.
•
In this mode, the robot will clean the area automatically and adjust its cleaning
mode according to the environment.
Note:
Press ON/OFF on remote control or "CLEAN" on robot.
•
In cleaning mode, press MODE button to select edge cleaning. The robot will
clean along the walls and obstacles.
•
Robot will goes into Zig-Zag cleaning mode when it detected an open area or
environment with less obstacles. This is the recommended cleaning mode for
laboratories and when you want to apply the UV or mopping function.
Summary of Contents for FagronLab RVC1
Page 1: ...FagronLab RVC1 Laboratory Robot Vacuum Cleaner User Manual ...
Page 2: ......
Page 22: ...FagronLab RVC1 FagronLab RVC1 User Manual 22 Notes ...
Page 23: ......
