Fagron FagronLab RVC1, User Manual

Page: 11 / 24

FagronLab™ RVC1
FagronLab™ RVC1 – User Manual | 11
7. Product operation
• Positioning the charging station: Place the charging station against the wall and remove obstacles 1 meter on either side
and about 2 meters front of the charging station, as shown in the image.
• To charge, make sure the “ON/OFF” switch on the side of the robot is switched to “ON”.
• Charge the robot in one of the two ways as shown below:
1. Plug the adapter into the robot and the other end to the power socket as shown in Figure 1.
2. Press ”HOME” on robot or “HOME” on remote control to operate the robot to go charging station for recharging as
shown in Figure 2.
Figure 1 Figure 2
Note:
• When robot is charging, LED panel will gradually show “11:11”, from left to right.
• Once charging is completed, LED panel will show “11:11”.
• In the standby status, the robot will broadcast voice “please charge” when battery power is low.
• In the working status, the robot will return to charging station automatically when battery power is low.
• Before first use, charge the robot for 12 hours.
• Charge the robot as soon as battery power is low.
• The robot will return to charging station automatically when it has finished cleaning or if battery power is low.
• If the robot is not to be used for a long time, fully charge the battery, turn the power switch off, remove and store it in a
cool, dry place.
• If the robot is not to be used for more than 3 months, charge the robot for 12 hours, turn the power switch off, remove and
store it in a cool, dry place.
To ensure optimum battery performance:
Starting up
Battery charging
• Press the “ON/OFF” switch on the side of the robot to “ON”.
• Press "CLEAN" on main body or ON/OFF on remote control to start cleaning.
Note:
• If robot is in sleeping mode, press "CLEAN" on main body or ON/OFF on remote control to wake up the
robot from sleeping mode, then press "CLEAN" again, the robot will start cleaning automatically.