background image

FagronLab™ PRO DMS – User Manual  |  4

1. Introduction

2. Service

3. Warranty

Thank you for purchasing the digital magnetic hotplate stirrer FagronLab™ PRO-DMS. This manual contains important 
operating and safety information. You must carefully read and understand the contents of this manual prior to operating 
this device.

In case of any problem, you can always contact the Service Department for technical support. Please provide the customer 
care representative with the following information:

  Serial number (on the rear panel).

 Certification.

  Description of problem.

  Methods and procedures adopted to resolve the problems.

  Your contact information.

This device is under warranty and free from defects in materials and workmanship, under normal use and service, for a 
period of 24 months from the date of invoice. The warranty is extended only to the original purchaser. Warranty is not 
valid on device which has been damaged on account of improper installation, improper connections, misuse, accident or 
abnormal conditions of operation.

For claims under the warranty please contact your local supplier. 

FagronLab™ PRO-DMS

Summary of Contents for FagronLab PRO-DMS

















Reviews: