Fagor SR-11, User Manual

Page: 99 / 384

98
4.4. Key associated functions
When the different buttons are pressed, the functions described modify the machine
conditions.
Button Machine status Display Action
Select Programme selection P01 Switches to temperature selection
Temperature selection 60º Switches to time selection
Time selection
25’
Switches to programme selection
Programme selection P01 Switches to temperature selection
While operating.
Temperature selection 60º Switches to time selection
While operating.
Time selection
25’
Switches to programme selection
In case of alarm AL-3 Reset alarm
Arrows Programme selection P01 Increase / Decrease Programme Number
Temperature selection 60º Increase / Decrease temperature
Time selection
25’
Increase / Decrease time
Start/Stop Programme selection P01 Start the cycle with the last selected parameters
Time selection
25’
Start the cycle with the last selected parameters
Temperature selection 60º Start the cycle with the last selected parameters
Operating Stop and reset selected programme
Prog. Machine stopped Enters programming mode
4.5. Information displayed
The display offers different types of information, including the programme number, the time
remaining and the temperature setting. The information may vary according to the state of
the machine at any moment.
When the machine is operating, the clock symbol flashes.
When the heating is ON, an arrow pointing upwards appears next to the thermometer.
The following table shows all the possible information displays and the conditions in which
they are displayed.
Display Machine status Comments
MP In the ignition (2s) Shows software version
END End / Anti-crease End of cycle / anti-crease cycle
(2)
AL-X Alarm Displays one of the alarms, see section 5
(2) The End / Anti-crease cycle lasts a maximum of 99 minutes. During this period, an alarm
will sound every three minutes, reminding you that the cycle has finished. After 99 minutes
the machine returns to the status: Pause.
.