Connect the cable to a socket with a good earth connection. This is essential to
ensure the correct operation of the electronic elements.
3.
After it is plugged in, place the oven in the space, taking special care not
to leave any surplus cable on top of the oven.
4.
A switch for disconnecting the oven must be placed in the most accessible site
possible, with a minimum of 3 mm between the contacts.
10
2.
At the back of the oven you will find cable “A” which is used to make the
electrical connection.
WARNING:
Before plugging the appliance in, check the following:
•
that the mains voltage corresponds to the voltage indicated on
the feature identification plate;
• that the electrical mains the oven is to be connected to is
powerful enough for the oven's maximum power load, indicated
on the feature identification plate.
FEINGL.05/05 29/6/05 10:36 Página 10