3-phase servomotors. FXM
3-PHASE SERVOMOTORS. FXM
Co
nne
ctio
ns
2.
Ref.2105
· 45 ·
FXM|FKM
SERVOMOTOR
Power connection
The power connection between the servomotor and the drive will be made
using the power cable as shown in the diagram:
F- 2/6
Power connection between a brakeless FXM servomotor and a drive.
F- 2/7
Power connection between an FXM servomotor with holding brake and a
drive.
M
3
MPC- 4x... in mm²
U
V
W
G
E
H
C
U
V
W
Cable without connectors
DRIVE
FXM MOTOR
MC 80
Power connector
Shield
Chassis
M
3
MPC- 4x... in mm²
U
V
W
C
D
B
A
U
V
W
Cable without connectors
DRIVE
FXM MOTOR
Power connector
MC 23, AMC 23
MC 46, AMC 46
Shield
Chassis
Brakeless FXM servomotors
M
3
Holding brake
(option)
MPC- 4x...+(2x1) in mm²
U
V
W
G
E
E
H
A
C
-
+
+24 V DC
U
V
W
Cable without connectors
DRIVE
FXM MOTOR
MC 80
Power connector
Shield
Chassis
M
3
Holding brake
(option)
MPC- 4x...+(2x1) in mm
2
U
V
W
C
F
D
B
E
A
-
+
+24 V DC
U
V
W
Cable without connectors
DRIVE
FXM MOTOR
Power connector
MC 23, AMC 23
MC 46, AMC 46
Shield
Chassis
FXM servomotors with holding brake
WARNING.
Never connect the servomotor directly to three-phase mains. A direct
connection will destroy it.
MANDATORY.
When connecting the drive module with its corresponding servomotor
using terminal strips MC 23, AMC 23, MC 46 or AMC 46, terminal U of
the module must be connected to the terminal corresponding to the U
phase (pin A) of the servomotor. Do the same for terminals V-V (pin B),
W-W (pin C) and PE-PE (pin D). When using a brake, pin E will be
supplied with 24 Vdc and pin F with 0 Vdc.
