5
2.3
DATA PLATE
The data plate in located on one side of the machine. Under no circumstances should the data plate be
removed from the unit. The data plate is essential to identify the particular features of your machine
and is of great benefit to installers, operators and maintenance personnel. It is recommended that, in
the event the data plate is removed, you copy down the essential information in this manual for
reference before installation.
Any transformations or changes made on the machines during installation should be reflected on the
data plate or using a label as below:
2.4
POSITIONING
Leveling and adjusting the height of the appliance is done by turning the leveling stands to the desire
height. Ensure that the unit is level before making any connections. (Fig. 2).
Fig.2
2.5
WATER INSTALLATION
Water installation is carried out as shown in figures 3 and 4. The hot water line to the dishwasher must
provide between 20
±5
psi of water pressure. The hot water heater should be set to deliver
≥
140
°
F water
temperature to the dishwasher for best results. Use ¾” copper tubing inlet line.
Fig. 3
S
= Gate valve
F
= Filter
H
= Hose
E
= Fill valve
M
= Pressure gauge
R
= ¾” Copper
CAUTION:
Do not confuse static pressure with flow pressure. Static pressure is the line pressure in a
“no flow” condition (all valves and services are closed). Flow pressure is the pressure in the fill line
Total load at indicated voltage
FI-48W
FI-64W
FI-72W
Summary of Contents for FI - 48 W
Page 2: ...1...
