12
Product Maintenance
3. Cleaning Sensors and Wheels
Slightly wipe all the sensors and wheels, as marked in figure below, with soft cleaning cloth or
tool.
4. Cleaning Charging Poles
Cleaning the charging poles, as marked in the figure below, with soft cleaning cloth or tool.
5. Cleaning Suction Passage
Cleaning the suction passage, as marked in the figure below, with soft cleaning cloth or tool.
Note: Avoid allowing the sensors to get wet.
6. Mopping cloth Usage
A. Stick mopping cloth on the bottom of the robot as shown in right figure
to mop the floor.
B. When the mopping cloth is dirty, users can wash it or stick a new one
on the bottom.
Note: Keep the appliance dry, do not clean the appliance under water.
Cliff sensor
