2
INSTALLATION
RECOMMENDATIONS
Allow air to circulate behind the refrigerator.
Do not cover the front grill or top of the refrigerator
with any object. If the refrigerator is placed
underneath a cupboard, leave a space for air to
circulate.
As far as possible avoid locating near to
heat sources.
If the refrigerator needs to be laid down for
unpacking or to change the direction of the
doors, ONLY LAY IT DOWN ON THE REAR
SECTION.
NOTE: The door hinges are on the right. If this is inconvenient
the hinges can be changed to the other side. Instructions are
contained in the section on changing the direction of door opening.
IMPORTANT. Ensure that the refrigerator is
well seated on the ground (without movement)
and is properly levelled (without tilting) by
adjusting the levelling feet.
This refrigerator operates at 220/230 v. If the voltage in
your home is different, a transformer should be used
with an outpout of not less than 500 W.
Use an EARTHED plug.
NOTE: The manufacturer will not accept any liability
in the event that these recommendations are not
followed.
BEFORE CONNECTING TO THE POWER
1.- Clean the inside of the refrigerator.
2.- Wait for 2 hours before connecting, to ensure proper functioning.
3.- Connect to the power.
Your refrigerator’s climate classification is stated on the specifications plate, and defines the
room temperature range for which the cooling unit
is designed, at which the apparatus is guaranteed
to operate correctly. Where two classes are indicated,
the unit will operate correctly in both.
Type Temperature
range
N
16º - 32º
ST
18º - 38º
T
18º - 43º
