EN
44
5.1.11
Steam condensation HRS (optional C. MOD.)
The steam condensation unit absorbs the steam generated during the washing process inside the
dishwasher. The absorbed steam is condensed inside the condenser, and the resultant water drips
into the tub, thereby preventing the kitchen from filling with steam and will benefit from an energy
savings.
The steam condensation unit air output must not be blocked, otherwise
it may not operate correctly and the machine could be damaged.
5.1.12
Switching off the machine
In the A, B models, to switch off the machine, turn the selector to 0.
In the C models, the dishwasher is switched off by pressing the ON-OFF button for 1.5 seconds.
The machine should not be switched off during the wash process as this will stop the tableware
inside the machine from being cleaned properly.
5.1.13
Self-cleaning cycle (only C MOD.)
The machine you have purchased is fitted with a self-cleaning
function. The self-cleaning cycle
should be run at the end of each working day. The programme runs an internal clean cycle to
automatically remove any dirt inside the machine. The cycle lasts approximately 2 minutes. During
this cycle, the machine will not be able to run any other dishwashing cycle. To run this programme,
proceed as follows:
DO NOT
remove the filters from the machine.
Close the hood.
Press the self-cleaning button.
At the end of the auto-wash cycle, the machine will automatically switched off,
remove the filters and clean.
Replace the filters and the overflow.
The self-cleaning cycle may not be able to thoroughly remove severe
incrustations of dirt. These should be removed manually.
5.1.14
Voltage configuration of the machine
The voltage configuration of the machine is stipulated on the nameplate. If the mains voltage supply
is not the same as that stipulated on the machine, there is a terminal box from which the different
voltage options can be configured (230V 1N~, 230V 3~ or 400V 3N~).
SEE FIGURE 7 (page 4).
In the event of a change, the supplier must be notified to ensure that the machine’s guarantee
remains valid.
ONLY AUTHORISED PERSONNEL may change the electrical
configuration. Users may not tamper with the machinery.
5.1.15
Dishwasher configuration (only C MOD.)
The machine you have purchased has a display in which it is possible to programme some functions
including language, time and date.
5.1.16
Language selection (only C MOD.)
The display can be viewed in the following languages:
SPANISH, ENGLISH, FRENCH, GERMAN,
ITALIAN, POLISH, TURKISH and RUSSIAN
. To change the language, proceed as follows:
With the machine switched off, press
MENU
for 5 seconds.
Scroll through the
CONFIGURATION
menu until reaching the
LANGUAGE
function, and
then press the
MENU
button
.
Press the
START
button to go to the
LANGUAGE
menu
.
Select the required menu using the
MENU
button.
Accept the language by pressing
START.
