Installation Manual - Page: 1
NV-300T/301T Man: 9910 Soft: 2.xx
INDEX
Introduction .............................................................................................1
Declaration of conformity ...........................................................................2
Safety conditions ........................................................................................3
Warranty terms ...........................................................................................5
Material returning terms ..............................................................................6
Unit description ................................................................................7
1.1 Front panel .........................................................................................7
1.2 Rear panel ........................................................................................10
1.3 General characteristics .......................................................................11
Connections ....................................................................................12
2.1 connection of the feedback systems ...................................................12
2.2 Power and machine connection .........................................................13
2.3 Turning the unit on and off ...............................................................13
Parameter setting ............................................................................14
3.1 Parameters to configure axis count and display .................................16
Appendix ................................................................................................20
Error codes ...............................................................................................20
Maintenance .............................................................................................21
INTRODUCTION
Attention:
Before starting up the DRO, carefully read the instructions of
Chapter 2 in the Installation Manual.
The DRO must not be powered-on until verifying that the
machine complies with the "89/392/CEE" Directive.