Page: 6 - Installation Manual
NV-300T/301T Man: 9910 Soft: 2.xx
MATERIAL RETURNING TERMS
When returning the DRO, pack it in its original package and with its original
packaging material. If not available, pack it as follows:
1.- Get a cardboard box whose three inside dimensions are at least 15 cm (6
inches) larger than those of the unit. The cardboard being used to make the
box must have a resistance of 170 Kg (375 lb.).
2.- When sending it to a Fagor Automation office for repair, attach a label
indicating the owner of the unit, person to contact, type of unit, serial number,
symptom and a brief description of the problem.
3.- Wrap the unit in a polyethylene roll or similar material to protect it.
4.- Pad the unit inside the cardboard box with poly-utherane foam on all sides.
5.- Seal the cardboard box with packing tape or industrial staples.
