Chapter 2 - page 5
MCO-TCO work mode
6.- This window shows the status of the «G, F, T, D, M» functions and the value of the variables.
PARCO
States the number of consecutive parts that have been executed with the same
program.
Whenever a new program is selected, this variable assumes value 0.
CYTIME
States the time elapsed during the execution of the parts. It is expressed in the
following
format: “hours : minutes : seconds : hundredths of second”.
Whenever the execution of a program is started, even though this is repetitive, this
variable assumes value 0.
TIMER
States the reading of the clock enabled by the PLC. It is expressed in format “hours
: minutes : seconds”.
7.- Reserved.
8.- Reserved.
Warning
The
symbol appears in the middle of the top window when there is
a part-progam selected to be executed or simulated.
In these cases, whn pressing:
the CNC executes the selected part-program.
it is de-selected, the CNC deletes the icon from the top center window.
