Faema E71 E, Engineer'S Manual

Page: 43 / 69

English
38 EN
Lights
Press the icon .
This menu allows adjustment of the
machine lights. Specifically:
- rear panel
- groups light
.
Set the values using the "
+
" and "
-
" keys.
The changes will be applied after the
data entered is confirmed with the key
.
In the next step, the display update begins. The screen
shown is displayed on all of the machine’s touch screens.
When the status indicator reaches 100% the update
is complete and the machine restarts automatically.
The following message appears when restarting:
Remove the USB Pen Drive.
UPDATE COMPLETED
REMOVE USB
DISPLAY CALIBRATION
The calibration procedure can be performed at any time by starting the
machine with Dip 3 ON.
The following message appears on all the displays when turned on:
Using a pen hold down the centre of the cross; repeat the operation in all the
points where the cross appears.
Perform the calibration on all the displays or only on those where it is required.
At the end of the operation, turn off the machine and return the Dip 3 to OFF.
Enter the standard information, update the machine data and reactivate
the resistance.
7 8
9
2
1

UPDATE SOFTWARE
0