27
4
PROBE MISS.
[DI]
err
Quantity of stops due to the internal overheating.
Quantity of stops due to an external emergency received on the terminal I4.
Quantity of stops due to a breakdown/fault of the possible power supply probe 4..20
mA.
[WITH CLOCK OPTION]
With clock option ON the display visualizes the date and time of the last stop next to the number of stops.
CLOCK
The following functions are available only in the controllers provided with the option
O = weekly clock and only with a backup battery type CR2032-3V (not provided) as
represented in the image.
The battery duration highly depends on the temperature of the environment and lasts 3
years in average. With low battery the display visualizes “
b
”.
Displays the date and time of the internal clock.
To change press
.
In this menu a weekly calendar can be enabled to edit the setting mode by activating the
speed limits SPD1, SPD2 ant control the relays.
Press the key
to enter the editing mode.
Then press
and
to enable (ON) or disable (OFF) the clock option of each day of
the week and increase or decrease the hours and the minutes when the enabling starts
and finishes.
Once changed the time, the system asks to copy the setting on the next day of the week.
To save press the key
, to cancel press
.
Caution:
As represented in the image, if the operation start is set on the day before the
day of the operation end, this will be set on the next day. Only one time can be set per
day.
2
OVERHEATING [DI]
err
4
EXTERNAL
[DI]
err
WED
13:27:13
05.09.2012
- - : - -
- - : - -
MON
OFF
19 : 00
06:00
MON
ON
