NON MANDATORY FUNCTIONING TEST (not required for installation purposes)
The Talos bollard is factory-tested in any normal working conditions before being sent out to customers.
Anyway, to enable some functioning tests to be carried out before installation, it is possible to access the inner terminal block
for the electrical connections by removing the hatch cover: undo the two lateral screws of the cover and pull outwards the
junction box including the connector.
NOTE WELL: once test is finished, put the box and the hatch cover back.
Release spanner
with triangular socket end
Post cover with
rubber edge
n°9 Led lights flashing
amber in colour
Back-reflecting sticker
with logo
Box to house the
electric cable from
the electronic controller
Cover
plate
Casing for concrete
embedding
Retractable, cylindrical post.
500/600/700/800 mm stroke options
Thickness: 4 mm or 12 mm
Stainless steel inox: only 4 mm
!
Pic. 1
Pic. 2
H
Stroke 500
Stroke 600
Stroke 700
Stroke 800
Junction
box with
connector
Open the
connector
and carry out
the connections
as indicated
in Pic. 14 page 11
M10
MAIN COMPONENTS
Retractable Oil-hydraulic Bollard
English
stroke constraint
H
[mm]
[mm]
[mm]
500
200
830
200
1.010
[A]
400
1.010
600
200
1.010
400
1.210
700
200
1.010
400
1.210
800
200
1.210
400
1.310
[A] Ground casing on demand,
not standard.
4
