FIXING APROLI 380 LB ON TO THE DOOR
Install the support bracket by means of bolts or screws, depending on the door construction, making sure it is fixed to a solid element
of the door frame, in such a position that the telescopic arm, once mounted to it, be free to move above the door top (Pic. 8).
ELECTRIC POWER SUPPLY TO THE MOTOR
Remove the cover protecting the inner terminal block to be able to connect the power supply cables (Pic. 9).
The bar and tube of the telescopic arm are required to be cut to L1 and L2 measurements.
It is important that the sliding bar be cut (shortened) so that the end with rounded corners be preserved, to facilitate sliding into
the tubular element (Pic. 7).
Pic. 7
Pic. 8
Pic. 9
English
7
L1
L2
Should the motor shaft turn in the wrong
direction, connect to the other live
Power supply
terminal block
!
Oil-hydraulic operator for bi-parting double folding doors
APROLI 380 LB
230 V - 50 Hz
blue c
o
mmon
liv
e
230 V - 50 Hz
blue c
o
mmon
liv
e
istr_aproli380lb_GB.ai 7 25/10/2018 17:11:32
