Faderfox MX 12, User Manual

Page: 9 / 16

Command type (Button 3)
Fader / Pot types:
notE
note command (note on for upper / right side, note off for lower / left side)
CC
control change command in 7 bit absolute mode (values 0 to 127) most used standard-mode
Pr
g
C
program change command (values 0 to 127)
Pbnd
pitch bend command 14 bit (values 0 to 16383) Resolution 7 bit !
AFtt
aftertouch (channel pressure) command 7 bit (values 0 to 127)
Encoder types:
CCr1
control change command in relative mode 1 (values 1/127)
CCr2
control change command in relative mode 2 (values 63/65)
CCAb
control change command in 7 bit absolute mode (values 0 to 127) mostly used as standard
Pr
g
C
program change command (values 0 to 127)
CCAh
two control change commands (MSB/LSB) in 14 bit highres mode (values 0 to 16383)
Pbnd
pitch bend command 14 bit (values 0 to 16383)
AFtt
aftertouch (channel pressure) command 7 bit (values 0 to 127)
notE
note command (note on for turning clockwise, note off for turning counter clockwise)
Button types:
notE
note command
CC
control change command
Pr
g
C
program change command
AFtt
aftertouch (channel pressure) command
(for all button types: upper value = press/on, lower value = release/off)
Command mode (Button 4)
Fader / Pot modes:
JUMP
jump mode, command will be sent immediately by moving the control
SnAP
snap mode, sends command not before catching the last value by moving the control
Encoder modes:
Acc0
no acceleration by faster turning
Acc1
low acceleration by faster turning
Acc2
middle acceleration by faster turning
Acc3
max acceleration by faster turning
Button modes:
btn
send momentary command (upper value = press, lower value = release)
to
g
L
send toggle command (upper value = on, lower value = off)