23
3 Vacuum cleaning
GB
For larger surfaces and classic hand-held
vacuum cleaner handling:
1.
First, put the connection piece (Fig. 6/4)
onto the front intake opening of the hand-
held vacuum cleaner.
2.
Now attach the floor nozzle (Fig. 6/8). You
can set the floor nozzle according to the
type of surface,
Z
Chapter 3.2, “If
required: set the floor nozzle”
.
For larger surfaces and for use as an up-
right vacuum cleaner:
1.
Connect the strap (Fig. 1/12) to the hand-
held vacuum cleaner by snapping both
karabiners (Fig. 1/11) into the holders pro-
vided (Fig. 1/23, Fig. 1/28).
2.
Now attach the connection piece (Fig. 7/4)
and the black suction hose (Fig. 7/9) to the
hand-held vacuum cleaner.
3.
Put the handle (Fig. 7/13) onto the suction
hose (Fig. 7/9).
4.
Attach the three extension tubes (Fig. 7/2)
to the handle (Fig. 7/13).
5.
Then attach the floor nozzle (Fig. 7/8) to
the lowest extension tube (Fig. 7/2).
4
8
4
8
6
4
9
13
8
2
7
ATTENTION:
Use only intact nozzles. Only use attach-
ments with bristles on sensitive surfaces
(so Fig. 1/5, Fig. 1/13, with the appropriate
setting also Fig. 1/8).
NOTE:
Always keep a good posture when working.
Choose the number of segments depend-
ing on the working height so that you can
work in as natural a posture as possible (as
illustrated in our next example).
NOTE:
There are a lot of other possible combina-
tions too. This operating manual is only
designed to make you familiar with the prin-
ciple of combining the elements.
