&
5HVSRQVLEOH
)RUHVW0DQDJHPHQW
Introduction
Design
Design, shop drawings and development by Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and drawing copyright remains the sole property of Factory Furniture Ltd.
General Specifications
Bench
Metric
length 1800mm | width 470mm | height 450mm *
Imperial
length 5’ 11” | width 1’ 6½” | height 1’ 5½”
* Not inc100mm below ground level for sub-surface fix option
Approx Weight
33kg
Fixing Centres
1760mm (5’ 9½”) x 340mm (1‘ 1½“)
Seat
(arm option available)
Metric
length 1800mm | width 550mm | height 890mm *
Imperial
length 5’ 11” | width 1’ 9½” | height 2’ 11”
* Not inc100mm below ground level for sub-surface fix option
Approx Weight
57kg (61kg with arms)
Fixing Centres
1760mm (5’ 9½”) x 410mm (1‘ 4“)
Chair
(arm option available)
Metric
length 580mm | width 550mm | height 890mm*
Imperial
length 1’ 11” | width 1’ 9½” | height 2’ 11”
* Not inc100mm below ground level for sub-surface fix option
Approx Weight
24kg (27kg with arms)
Fixing Centres
540mm (1’ 9½”) x 410mm (1‘ 4“)
Detailed Material & Finish Specifications
Seat & Back Slats
• Manufactured from FSC
®
certified tropical hardwood
(other FSC timber options available
upon request)
• Profiled and left untreated as standard
(oil or microporous woodstain treatment available
on request)
• Supported on frame and attached with 8 no. fixing points per slat (4 no. per slat for chair)
Frame
(including arms if supplied)
• Manufactured from stainless steel square section tubing with satin polished finish
• Anchored using 4 no. zinc-coated M10 x 75mm sleeve anchors per bench, seat / chair (1 no. per leg)
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of slats and frame - check all items for superficial or physical damage.
Three Monthly
Clean all items as detailed below check all fixings are seated correctly; inspect timber for serious damage and
splinters.
Six Monthly
Secure all fixings; full clean as detailed below; check that bench, seat / chair is firmly secured to the ground
2
UTIL BENCH/SEAT/CHAIR specification
