factoryfurniture.co.uk
Introduction
Design
Design, shop drawings and development by
Factory Furniture Ltd.
Manufacture
Factory Furniture manufactured components. Products
are assembled in Factory workshops, checked and
dispatched ready for installation. Replacement products
or components thereof should be ordered direct from
Factory Furniture Ltd.
Copyright
The design copyright for the product and
drawing copyright remains the sole property
of Factory Furniture Ltd.
General Specifications
1.2x0.6m Single Bench
Metric
L 1200mm | W 605mm | H 470mm
Imperial
L 3’ 11” | W 2’ 0” | H 1’ 6½”
Fixing Centres
900mm (2’ 11½”) x 400mm (1’ 3½”)
Approx Weight
95kg
1.2x0.6m Double Bench
Metric
L 1200mm | W 610mm | H 470mm
Imperial
L 3’ 11” | W 2’ 0” | H 1’ 6½”
Fixing Centres
900mm (2’ 11½”) x 400mm (1’ 3½”)
Approx Weight
104kg
1.2x0.6m Link Bench
Metric
L 1200mm | W 600mm | H 465mm
Imperial
L 3’ 11” | W 1’ 11½” | H 1’ 6½”
Fixing Centres
900mm (2’ 11½”) x 400mm (1’ 3½”)
Approx Weight
69kg
1.8x0.6m Single Bench
Metric
L 1800mm | W 605mm | H 470mm
Imperial
L 5’ 11” | W 2’ 0” | H 1’ 6½”
Fixing Centres
1500mm (4’ 11”) x 400mm (1’ 3½”)
Approx Weight
134kg
1.8x0.6m Double Bench
Metric
L 1800mm | W 610mm | H 470mm
Imperial
L 5’ 11” | W 2’ 0” | H 1’ 6½”
Fixing Centres
1500mm (4’ 11”) x 400mm (1’ 3½”)
Approx Weight
149kg
1.8x0.6m Link Bench
Metric
L 1800mm | W 600mm | H 465mm
Imperial
L 5’ 11” | W 2’ 0” | H 1’ 6½”
Fixing Centres
1500mm (4’ 11”) x 400mm (1’ 3½”)
Approx Weight
98kg
0.6m Corner Bench
Metric
L 665mm | W 630mm | H 465mm
Imperial
L 2’ 2” | W 2’ 1” | H 1’ 6½”
Approx Weight
30kg
Detailed Material & Finish
Specifications
Bench Slat Assembly
•
Manufactured from FSC® certified tropical
hardwood.
•
Profiled and left untreated as standard
(oil or
microporous woodstain treatment available on
request)
•
Slats mounted onto mild steel frame - hot dipped
galvanised and polyester powder coated finish
(grey
as standard or as per customer specification)
Base Assembly
•
Manufactured from Corten steel featuring an all
welded construction.
(Option for galvanised mild
steel)
•
Mild steel option - assembly is hot dipped galvanised
with polyester powder coated finish
(grey as
standard or as per customer specification)
•
Bench slat assembly bolted to base assembly using
M8 bolts provided
•
Bench is anchored to ground using 4 no. zinc-
coated M10 x 75mm sleeve anchors per base.
Bench slat assembly must be removed from base to
allow access to fixing points.
General Maintenance
(Recommended Schedule & Guidelines)
Daily/Weekly/Monthly
(or as adopted)
Visual checks of bench slat assembly and base
assembly - check all items for superficial or physical
damage.
Three Monthly
Clean all items as detailed below check all fixings are
seated correctly; inspect timber for serious damage and
splinters.
Six Monthly
Secure all fixings; full clean as detailed below; check
that bench is firmly secured to the ground.
C005669
Responsible
Forest Management
