factoryfurniture.co.uk
Polyester Powder Coated & Galvanised
For general cleaning using a damp cloth and warm
soapy water only. Scourers and abrasive cleaners are
NOT suitable for this type of finish and may damage it.
Before using any cleaning agents to remove graffiti etc.
try on a small, inconspicuous area first to avoid causing
more unsightly damage.
Repairs
FSC Timber
For light damage, please see section on specific
maintenance details above. For instances of heavy
damage, the timber item should be replaced. Please
order against the part number reference in the
reordering section towards the end of this manual.
Stainless Steel
Light damage (surface scratches etc.) can be removed
using an emery pad (240 grit) and freeing oil such as
‘WD40’. Care should be taken to follow the direction
of the brushing grain. It is recommended that a trial
repair be carried out on an unimportant surface first. No
corrosive cleaners or other abrasives should be used.
Any contamination, particularly carbon teel scuffs from
vehicles, should be quickly removed to avoid corrosion.
Polyester Powder Coated & Galvanised Surfaces
For light damage (scratches, chips etc.) repair using
touch-up paint to match original colour (available
from Factory Furniture Ltd). Paint application should
be carried out in accordance with approved methods
detailed by the paint manufacturer. Please note that
it is advisable to use professional painters to achieve
best results when touching up larger areas. Products
for respraying larger areas are available from Factory
Furniture Ltd.
Heavy Damage
In the event of serious damage to any component,
replacements should be ordered from Factory Furniture
Ltd. In this event (or if the product needs to be
disassembled for any reason), please contact Factory
Furniture for detailed technical advice.
Reordering / Spares
(Part No. & Item Description)
P2006 / 01
1 no. Murton table slat set (not including frame) - (2 no.
outer slats & 4 no. inner slats total)
P2006 / 02
1 no. Murton picnic table slat set (not including frame)
- (2 no. outer table slats, 4 no. inner table slats & 4 no.
seat slats total)
Instructions For Reordering
If possible, please specify job name or number at the
time of reordering to enable identification of details such
as the original species of timber used, stainless steel
finishes and polyester powder coat colours etc. In any
event where either, additional orders are required, or
spares and replacements are required please contact
Factory Furniture Ltd. Using the part numbers given
above as reference should help us to process your
enquiry more efficiently.
Note - All fittings required to assemble ordered parts will
automatically be included in the order.
AutoCAD Drawing List
FF2006 / 01
MURTON TABLE
OVERVIEW DRAWING
FF2006 / 01.5
MURTON PICNIC TABLE
OVERVIEW DRAWING
FF2006 / 02
MURTON TABLE
X-SECTION DRAWINGS
FF2006 / 02.5
MURTON PICNIC TABLE
X-SECTION DRAWINGS
FF2006 / 03
MURTON TABLE
TIMBER PARTS DETAIL DRAWINGS
FF2006 / 04
MURTON PICNIC TABLE
STEEL PARTS DETAIL DRAWINGS
FF2006 / 05
MURTON PICNIC TABLE
SETTING OUT DRAWING
