- 12 -
PILOT-OP-EN
INSTALLING DISK PAD DRIVER OR BRUSH:
1. Turn
ON
( ) machine power.
2. Raise the Scrubdeck by depressing the Brush switch
to the up and
OFF
( ) position
(Or Raise with Lever
- OPTIONAL)
and turn the machine power back
OFF
(
). Remove Key.
3. Loosen Star Knobs
(A)
and remove Shrouds to access
the Scrubdeck
(SEE BELOW)
.
4. Attach Brushes or Pads to Motor Drives. Squeeze the
scissor locking device
(B)
and lift brush up on to the
motor drive hub
(C)
. Make sure the scissors close and
lock on the brushes
(SEE BELOW)
.
INSTALLING DRIVER PADS:
1. Select the correct Pads that best meet your cleaning
application needs. Consult your local dealer for
assistance.
2. Pad Installation: Attach Pads to Pad Drivers before
connecting drivers to motor hub. Press down on
center clip
(D)
till it snaps into place
(SEE BELOW)
.
NOTICE
SCRUB BRUSHES / PADS:
There are many different types of brushes available to
cover applications from cleaning heavily soiled fl oors to
polishing. A Pad Driver is also available to take advan-
tage of the many cleaning pads on the market. Please
refer to the
“Common Wear Parts”
page to assist in
selecting the proper Brush / Pad for the work at hand.
D
A
A
B
C
C
B
C
