2
Instructions
Channel synchronizing of the receiver and microphone
Align infrared areas of the receiver and microphone within 10~30cm.
Changing the receiver’s channel
1
Press the synchronizing button of the
microphone.
2
The microphone's LED will grow to denote
transmitting the frequency to the receiver
and synchronizing the channels.
Changing the microphone
’s channel
1
Press the synchronizing button of the
receiver and the receiver will transmit the
frequency to the microphone and
synchronize the channels
2
The microphone's LED will grow to denote
its channel synchronized by the receiver.
If it doesn’t work check that you have the IR sensor panels aligned, that they are facing each
other, devices are within 10~30cm of each other, and try again.
Battery type setting
1
Use
MENU
button to go to the BATTERY
TYPE page.
2
Press and hold
SET
button for 3 seconds,
then the cursor
will flash to allow
changes to be made.
3
Press
SET
button to select either
NiMH
(rechargeable battery) or
AKLN
(alkaline
battery).
4
3 seconds after selecting a battery type, it
will be automatically saved.
FREQ
SQ
RF
630000
VOL
S E T
30cm
CH
FREQ
SQ
RF
AF
A B
0 0 1
630000
VOL
CH
FREQ
SQ
RF
AF
A B
0 0 1
630000
VOL
SDR-6120
Wireless Receiver
SET
SYNC
SET
SYNC
10~30cm
