Factor O2 VAM 2023, Manual

Page: 17 / 20

2023 O2 VAM
Apply Loctite 243 on bolt threads. Thread the
bolt in but do not tighten, this will allow the
insert to align when installing the axle
Install a front hub in the dropout with the free hub on
non-drive side. This will allow better access for the
next step. Install the thru-axle with the nylon washer
and tighten to 12Nm
After ensuring the dropout insert is correctly
aligned, tighten the dropout bolt to 1 Nm.
Remove the thru-axle and remove the hub. Install
front wheel and tighten the thru axle (with the nylon
washer) to 12Nm.