Factor O2 VAM 2023, Manual

Page: 16 / 20

2023 O2 VAM
Apply Loctite 243 on bolt threads. Thread the
bolt in but do not tighten, this will allow the
insert to align when installing the axle Install a rear hub in the dropout with the free
hub on non-drive side. This will allow better
access for the next step. Install the thru-axle
with the nylon washer and tig hten to 12Nm.
After ensuring the dropout insert is correctly
aligned, tighten the dropout bolt to 1 Nm.
Remove the thru-axle and remove the hub.
Install the rear wheel and tighten the
thru-axle (with the nylon washer) to 12Nm.