www.factorelectronics.com
SAFETY INSTRUCTIONS
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY INSTRUCTIONS
• Read and keep these instructions.
• Heed all warnings and follow all instructions contained within this manual.
• Do not use this unit near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce
heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and
the point where they exit
from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as when
the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
• Operate the product only with the voltage specified on the unit. Fire and/or electric shock may result if a
higher voltage is used.
• Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and
do not place heavy objects
on the power cord and/or the product itself, doing so may result in fire or electrical shock.
• Replace the protective cover over the speaker terminals after installation. Do not touch the speaker
terminals as electric shock may
result.
• Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas
pipe, as a severe explosion
and/or fire may result.
• Be sure the installation of this product is stable, avoid slanted surfaces as the product may fall and cause
injury, property damage,
electrocution and/or fire.
• Note when the unit is turned off it is not completely disconnected from the wall AC power outlet. Do not open
the cover.
REFER ALL
SERVICE TO A QUALIFIED SERVICE TECHNICIAN
WARNING!
TO REDUCE THE RISK OF
FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN
OR MOISTURE.
CAUTION!
TO REDUCE THE RISK OF
SHOCK, DO NOT REMOVE THE COVER,
NO USER SERVICABLE PARTS INSIDE.
REFER SERVICE TO A QUALIFIED
SERVICE TECHNICIAN.
