5
www.factorelectronics.com
Panel
Descriptions
TX (transmitter) Balun
1.
HDMI Output
– HDMI loop output port connects to any HDMI display device such as a TV
or Projector using an HDMI cable.
2.
HDMI Input
– Connect to any HDMI source device such as a DVD, computer or gaming
player using an HDMI cable.
3.
CAT Output
– RJ45 connector, connect to CAT IN port on the receiver unit with Cat6
cable.
4.
Service port
– Used for possible firmware upgrades
5.
IR Out port
– 3.5mm mono phone jack, connects to the included IR emitter cable.
6.
Power port
– Use included 12V/1A DC power adapter to power the unit.
RX (receive) Balun
1.
HDMI Output
– Connect to any HDMI display device such as a TV or a Projector using an
HDMI cable
2.
CAT IN
– Connect to CAT OUT port on the Transmitter unit with a Cat6 cable
3.
Service port
– Used for possible firmware upgrades
4.
IR IN
– 3.5mm stereo phone jack, connect to the included IR sensor cable.
5.
Power port
– Used the included 12V/1A DC power adapter to power the unit.
