background image

 

13 

www.factorelectronics.com 

[email protected] 

In the event the product returned to Factor Electronics has been discontinued (i.e. the product 

is  no  longer  being  manufactured  by  Factor  Electronics  but  is  still  under  warranty),  Factor 

Electronics will, at its discretion, either repair or replace with recertified product.  

 

Once you have obtained an RMA number 

 

After obtaining an RMA number from  Factor Electronics, you must send the product - freight 

prepaid - to Factor Electronics Technology Co., Ltd. The Factor Electronics RMA number must 

be prominently displayed on the outside of your package. If you send your product to Factor 

Electronics without the RMA number prominently displayed on the outside of the package, it 

will be returned to you unopened. 

 

Please  use  a  shipping  company  that  can  demonstrate  proof  of  delivery.  Factor  Electronics 

does  not  accept  responsibility  for  any  lost  shipments  unless  proof  of  delivery  to  Factor 

Electronics is provided.  

 

Please note 

 

Product shipped to Factor Electronics must be properly packaged to prevent loss or damage in 

transit.  

 

Shipping your RMA to Factor Electronics using regular mailing envelopes is not acceptable, as 

they do not protect the product from damage during shipping.  

 

Factor  Electronics  will  not  repair  or replace  a module that is  shipped  in  such  a  way  that  the 

product is not properly protected.  

 

Factor Electronics will not accept any product that has been damaged as a result of accident, 

abuse,  misuse,  natural  or  personal  disaster,  or  any  unauthorized  disassemble,  repair  or 

modification.

 

Summary of Contents for HD100BaseT-In-Wall-Balun















Reviews: