7
www.factorelectronics.com
10: MCU firmware upgrade
2.
11: Valens RS232 pass through & MCU firmware upgrade
3.
Micro USB port
– Used for firmware upgrade
4. HDBT Output
– Connect to HDBT Input on the RX unit.
5. RS232 port --
3-pin phoenix terminal connector.
6. DC Power port --
2-pin phoenix terminal connector, connect to 24V/1A DC power supply if
power is not available at the RX end.
RX Receiver
①
Coaxial Audio Output --
S/PDIF audio out, connect to an AV Receiver.
②
L/R Audio Output -- RCA connector
, connect to an AV Receiver
③
HDMI signal link indicator --
Lit when an HDMI sink device is connected
④
HDMI Output
– Connect to an HDMI enabled display TV or projector
⑤
IR Rx/Tx -- Connect to IR receiver cable/ IR emitter cable
⑥
Mode DIP Switch
– To switch RS-232 serial port between pass-through and firmware
