Factair Safe-Air F8100, Operating Manual

Page: 32 / 38

31
Respiratory Protective Equipment at Work
A practical guide
HSG53 (Fourth edition, published 2013)
Dos and don’ts
Do’s Don’t’s
Always ensure the breathing apparatus is in
good working order before putting it on,
even when new.
Always look after your supply hose during
use – your life may depend on it.
Always use all the straps provided, making
sure they are correctly positioned and
adjusted. Follow the manufacturer’s
instructions.
Ensure that an adequate clean air supply is
available for all users.
Ensure that the compressed air quality
meets the minimum requirements of BS EN
12021.15
Always plan your exit from the
contaminated area so you don't run out of
air.
Ensure the other PPE you need to wear is
compatible with the BA.
Never place the hose inlet near to potential
sources of contamination, eg vehicle
exhausts.
Never use the equipment without the waist
belt.
Never use a light-duty airline hose where
there is any potential for crushing by
vehicles or passers-by etc.
Never keep working if the airflow rate drops
or any warning devices are activated. Leave
the work area immediately.