Factair Safe-Air F8100, Operating Manual

Page: 12 / 38

11
If you also want to test for Volatile Organic
Compounds then by clicking on the adjacent box
you can set a maximum limit. For further
guidance on VOCs see appendix 3.
Click on the tick to confirm the VOC value you
have entered as a test parameter.
Once you have selected the appropriate
standard press the save button to update the
change or alternatively to discard press the
waste basket icon.
4.2 Configuring the main alarm
To enter the set up mode press this icon,
which is located in the top right hand corner
of the screen near the battery icon.
Enter user log in password “installer”.
The F8100 has 2 configurable alarms, a main
and pre alarm. Both of the configurations
pages are located in the settings pages.
The alarm values are based on the selected
alarm standard. The values can be changed
from this screen.
If a maximum limit for VOC has been inputted
then the alarm will also activate if this is
exceeded.