FACHOWIEC KRAMER 200, Manual

Page: 14 / 28

Page 14 with 28 Page 14 with 28 Page 14 with 28 Page 14 with 28
MANUAL - KRAMER BI-pulse MIG / MAG 200
CODE IMPORTANCE DESCRIPTION
Hoti
Intensity
current
the initial
Increase welding current during arc ignition - mode only 4ST Special.
Burn Time
Burnback
Zmienjszenie or you increase the length of wire protruding from the nozzle after
welding.
NOTE - Particular mentioning important function during spwania welding. NOTE - Particular mentioning important function during spwania
aluminum alloys.
slop
rise time The time of transition from the initial value of the welding current Hoti to basic
welding current - mode only 4ST Special.
Sptt time SPOT
The duration of the weld spot
freq pulse rate The frequency of the pulse mode with a double pulse.
NOTE - recommended value of 1.5 to 2.0 Hz
Duty
The cycle pulse
The cycle duration pulse mode with a double pulse welding.
P-p
pulse modulation
The placement of the peak welding current mode pulse podrójnego
Hotu Tension
current
take off
The arc voltage ignition pdczas
PU
Power base Base voltage arc mode, a double pulse
BU
peak voltage Peak voltage arc in double pulse mode
StFd
slow start Slow start mode wire MIG / MAG welding
VDR
Reduction of current The device has a system VRD (Voltage Reduction Device) which mode
MMA Rutile and basic electrodes lowers the load voltage, which greatly
enhances user safety. In special cases, the use of electrodes with high
current arc ignition problems can occur at his initiation.
Stop
The time intervals between
welds
The time interval between welds during continuous spot welding CPOT.
preg gas before
The time of gas flow before the arc ignition
fast gas at
Gas flow time after the expiry of the arc
End Voltage end of the arc voltage during the blanking - only mode 4ST Special.
FORCE The stabilization of the arc
Increasing or decreasing length arc welding
depending on the distance from the electrode base material.