Tools
7.
1
Torque Wrench
2.5mm
HEX
4mm
HEX
5mm
HEX
Metric 1/4" Square Drive
Hex Bit Socket
Permanent
Threadlocker
Threadlocker Instructions:
Adhesive Instructions:
1. Apply the surface activator to both surfaces.
2. Wait 20 seconds for the activator to completely dry.
3. Apply glue sparingly to one side only using approximately one
drop per square inch of surface.
4. Press parts together immediately.
5. Hold in place for 30 seconds or until bond sets.
1. Apply primer to surface of bolt and nut.
2. Apply several drops of the threadlocker onto the bolt at the nut
engagement area.
3. Assemble parts and tighten as required. Sets in approximately
10 minutes and fully cures in 24 hours.
Torque Wrench Instructions:
1. Turn the bezel until pointer is resting on zero.
2. Attach a socket or attachment to the square drive.
3. Place the socket or attachment over the fastener to be torqued.
The torque wrench handle must be perpendicular (90 degrees)
to the centerline of the drive, socket and fastener.
4. Load the torque wrench at a slow and steady rate until the pointer
indicates the desired torque.
5. Stop applying force. The pointer should return to zero.
Cyanoacrylate
Adhesive
Removable
Threadlocker
Locktite
222
Locktite
263
Locktite
324
Locktite
7075
Locktite
7649
Threadlockers & Adhesive
PURPLE
RED
GL
UE
PRIMER
AC
TIV
AT
OR
Summary of Contents for Surround 360
