Fac F350I, Use And Maintenance Manual, Page: 32 / 48

30
Fig. 17
Fig. 18
EN
SLICER CLEANING
• Lift the tray (8) and remove it
(Figure 17).
☞
The product tray (8) is
particularly heavy, work
carefully, possibly with
two operators.
7
.6 - Machine reassembling
Proceed in the opposite direction to what indicated in the previous operations.
To reassemble it:
• Correctly reposition the tray (8) on
the tray support (6).
• Tighten the knob (6a) until you free
the tray (8).
7
.7 - Store the slicer
• When you finish using it, after carefully
have cleaned all the components (as
described in the previous sections)
be sure to bring the graduated knob
back to “ 0 ”.
• Is advised to cover the slicer with a
towel to protect it from dust.
If it is not intended to use the slicer
for some days, store it in a sepaired
and dry place.
6a
8
6