Fac F250 TS-V, Use And Maintenance Manual, Page: 17 / 62

15
EN
ELECTRICAL AND MECHANICAL SAFETY DEVICES
The mechanical safety devices taken
are the following:
• A series of aluminium and
transparent plastic guards on the
product carriage.
The electrical safety devices taken
are the following:
• Start/stop button that requires the
machine voluntary restart in case
of an outage or interruption of the
power supply.
• Start up and stop are performed with
the button connected to a control
auxiliary network that prevents
accidental start ups of the appliance
after a possible electrical power cut.
Do not tamper, remove nor bypass, under no circumstances,
the safety devices installed on the equipment.
3
.1 - Residual risks
During slicer use, cleaning and maintenance operations,
notwithstanding all the possible cautions taken during the design
and the construction of the machine, residual risks (cutting) still
exist during use or during cleaning or maintenance. Therefore be
careful and PAY THE UTMOST ATTENTION to what you are doing.
DO NOT use the machine if you are not in perfect psychological
and physical conditions.
DO NOT ALLOW anyone near the machine when it is in use.
ALWAYS wear gloves that can resist cuts or tears when cleaning,
lubricating or sharpening the blade.