Fac F 250 E, Use And Maintenance Manual

Page: 44 / 80

42
EN
PROBLEM CAUSES SOLUTIONS
Pressing the green or
white button will start the
machine, but the operation
light will not turn on. Defective indicator. Do not use the machine with
light indicator off; promptly
consult the customer
service.
The machine starts but
vibrates, the motor is very
hot and there is bad smell. Defective motor
or transmission. Do not use the machine,
promptly consult the
customer service.
The machine under load
slows or stops. Defective transmission. Consult the customer
service.
Excessive resistance at
cutting of the product. The blade is blunt. Sharpen the blade.
The slices are ragged
and/or irregularly shaped. The blade is blunt. Sharpen the blade.
Blade excessively worn. Consult the customer
service.
The blade sharpening is
unsatisfactory. Worn wheels. Replace the wheels; Call
the customer service.
The product tray does not
slide. Insufficient guides
lubrication. Lubricate.
Pressing the black or
red button won’t stop the
machine. Defective electrical control
circuit. Stop the machine pulling
the plug from the network
and call customer service.
NOTE TO USER
This publication shall consist of n°80 pages as specified below:
• Title page with Notes for the User (no print back);
• Index of contents, pag. 3;
• From pag. 3 to pag. 75: progressive numeration.
The manufacturer reserves its right to bring changes to the information indicated in the manual
without the obligation to communicate it in advance, as long as they don’t alter safety.
0
1
G/V
MF
B M
MF.
N. O.
MOD.195 MF. 6,3
MOD.220 MF. 8
MOD.250E MF. 8
MF 6,3x2
2 1
3 4
G/V B M
0
1
G/V
MF
B M
MF.
N. O.
MOD.195 MF. 6,3
MOD.220 MF. 8
MOD.250E MF. 8
MF 6,3x2
2 13
4
G/V B M
43
EN
Only for personnel authorized by the manufacturer
ELECTRICAL SCHEME CE DOM
for versions: F 195 - S 220- F 250 R - F 250 E - F 275 E - F 300 R
ELECTRICAL SCHEME EXTRA CE - CE DOM
for versions: F 330 I - F 350 I - F 370 I - F 330 TSV - F 350 TSV - F 370 TSV
G/V = Yellow/Green
M = Brown
B = Blue
Condenser
Condenser
Micro
Optional, on request
Rotary
bipolar switch
Single-phase line 220V - 50Hz
Power 220V - 50Hz
Mandarin micro pin
To the brown of the PA205
Tighten
on slicer’s
chassis
MOTOR
MOTOR
Tilting
switch