24. Install a ½” -13 x 4” bolt, washers and nut through the
tabs on the rear crossmember and the bushing on the
center bracket. Leave loose at this time.
SEE FIGURE 27
21. Locate the center differential bracket (FT30567). Install
two of the Fabtech (FT1020) bushings and one sleeve
(FT181) into the barrel on the differential bracket.
SEE FIGURE 23
22. On the front axle tube, remove the rear and lower bolts
to allow for the new center differential bracket to be
mounted.
23. Mount the differential bracket to the center of the
differential using three M10-1.5 x 45mm bolts, lock
washers, and flat washers. Mount the front tab on the diff
to the center bracket using one ½”-13 x 2” bolt, nut and
washers. Leave loose at this time.
SEE FIGURES 24-26
8 of 17
FIGURE 22 - STEP 20
FIGURE 24 - STEP 23
FIGURE 25 - STEP 23
FIGURE 27 - STEP 24
FIGURE 23 - STEP 21
FIGURE 26 - STEP 23
