FabIATech Corporation
24
Boot Up Num-lock
This field is used to activate the Num Lock function upon system boot. If the setting
is on, after a boot, the Num Lock light is lit, and user can use the number key.
Available options: On, Off
Default setting: On
Floppy Drive Swap
The field reverses the drive letter assignments of your floppy disk drives in the Swap
A, B setting, otherwise leave on the default setting of Disabled (No Swap). This
works separately from the BIOS Features floppy disk swap feature. It is functionally
the same as physically interchanging the connectors of the floppy disk drives.
When the function’s setting is <Enabled>, the BIOS swapped floppy drive
assignments so that Drive A becomes Drive B, and Drive B becomes Drive A under
DOS.
Available options: Disabled, Enabled
Default setting: Disabled
Floppy Drive Seek
This field is used to set if the BIOS will seek the floppy <A> drive upon boot.
Available Options: Disabled, Enabled
Default setting: Disabled
PS/2 Mouse Support
The setting of Enabled allows the system to detect a PS/2 mouse on boot up. If
detected, IRQ12 will be used for the PS/2 mouse. IRQ 12 will be reserved for
expansion cards if a PS/2 mouse is not detected. Disabled will reserve IRQ12 for
expansion cards and therefore the PS/2 mouse will not function.
Available options: Disabled, Enabled
Default setting: Enable
System Keyboard
This field specifies if an error message should be prompted when a keyboard is not
attached.
Available options: Absent, Present
Summary of Contents for FX5503
