FabiaTech FX5503, User Manual

Page: 28 / 62

FabIATech Corporation
23
1
st
–3
rd
Boot Device
These fields determine where the system attempts to look for the boot drive priority
for an operating system. The default procedure is to check the hard disk, and then
the floppy drive, and last the CDROM.
Available options: Disabled, IDE0-1, IDE-2, IDE-3, Floppy, ARMD-FDD, ARMD-HDD,
CD/DVD, USB-FLOPPY, USB-CDROM, USB-HDD and SCSI, Network
Default setting: IDE-0 for 1
st
Boot device; Floppy for 2
nd
Boot Device; CDROM for 3
rd
Boot Device
Try Other Boot Device
If all 3 1
st
–3
rd
boot devices specified by CMOS setup are not available to boot,
BIOS will try to boot other available devices in following order if this question is set
to “Enabled”.
Initial Display Mode
This field specifies can set Normal POST screen (BIOS) or Boot with logo, no POST
messages (Client).
Floppy Access Control
This field specifies the read/write access when booting from a floppy drive.
Available options: Normal, Read-only
Default setting: Normal
Hard Disk Access Control
This field specifies the read/write access when booting from a HDD drive.
Available options: Normal, Read-only
Default setting: Normal
S.M.A.R.T for Hard Disk
This field is used to activate the S.M.A.R.T (System Management and Reporting
Technologies) function for S.M.A.R.T HDD drives. This function requires an
application that can give S.M.A.R.T message.
Available options: Disabled, Enabled
Default: Disabled