FabiaTech Corporation
9
Installing Compact Flash
If you are installing Compact Flash modules you need to remove the real panel
and bottom cover. (Please see the spots circled.)
Installing Memory: SO-DIMM Socket for DDR Modules
You may extend additional memory to FX5201 by removing the bottom cover, See
as following figure and rear pictures.
The SO-DIMM socket supports 128MB to 1GB of
DDR RAM modules.
Note: The Compact Flash socket supports 3.3V Compact Flash and Micro Drives.
The JP2 is used to select master/slave device of this socket and default is slave
(close). Be sure to avoid the same master/slave setting with which connects to
IDE connector, if you use CF and IDE hard disk simultaneous.