FabiaTech FR9100 User Manual Download Page 7

Page: 7 / 79

FabIATech Corporation

Chapter 1 Introducing the FR9100 System

Overview

The FR9100 is a 1U rack-mount embedded system with Intel® low-power CPU board

inside. This user’s manual provides information on the physical features, installation,
and BIOS setup of the FR9100.

Built to unleash the total potential of the Intel® Celeron® or Core™ 2 Duo Processor,

Able to supports optional 1.9GHz or 2.53GHz CPU, this system supports six PCI-e
10/100/1000 Base–TX LAN ports, four SATA II ports, DDRIII memory up to 8GB of two

SODIMM slots ,one expansion PCI slot, six USB-2.0 ports, and one VGA Connector.

Each FR9100 has one RS232 port for console communications.

The FR9100 is perfect for Internet Router, VPN Gateway, Mail Server, and firewall

control. The unit is only 325 mm (D) X 430 mm (W) X 44mm (H).

Summary of Contents for FR9100
















































































Search results

Summary of Contents for FR9100

Reviews:

Related manuals for FR9100

Brands by name

Popular brands

FabiaTech FR9100, User Manual

Search results

Summary of Contents for FR9100

Reviews:

Related manuals for FR9100

Brands by name

Popular brands