FabiaTech FR9100 User Manual Download Page 55

Page: 55 / 79

FabIATech Corporation

Max TOLUD

This specifies the Maximum Value of Top Of Low Usable DRAM (TOLUD).

Available Options: 2GB, 2.5GB, and 3GBHz

Default setting: 3GB

Video Function Configuration

DVMT Mode Select

This field is the

DVMT mode is memory that is dynamically allocated based on

memory requests made by application and are released back to the system once
the requesting application has been terminated. Fixed mode is non-contiguous

page locked memory allocated during driver initialization to provide a static

amount of memory.

Available Options: Disabled, Fixed Mode, Combo Mode and DVMT Mode

Default setting: DVMT Mode

DVMT/FIXED Memory

This field specifies allows you to select the maximum amount of graphics memory

to be shared with the system memory.

Available Options: 32MB, 64MB, 128MB and Maximum DVMT

Default setting: DVMT Mode

Summary of Contents for FR9100
















































































Search results

Summary of Contents for FR9100

Reviews:

Related manuals for FR9100

Brands by name

Popular brands

FabiaTech FR9100, User Manual

Search results

Summary of Contents for FR9100

Reviews:

Related manuals for FR9100

Brands by name

Popular brands